USB Digital Microscope 1.3 Mega Pixel Video Camera 200X

USB Digital Microscope 1.3 Mega Pixel Video Camera 200X

  Product Specifications

 

Image Sensor: 1.3M pixels
Controller: High Speed DSP
Lens: Dual Axis 27X & 100X Micro-Scope Lens
Focus Range: Manual Focus from 10mm ~ Infinite
Snap Shot: Software and Hardware (Optional)
Video Capture Resolution: 2304x1738(5M Pixel),1600x1200(2M Pixel),1280x1024(1.3M Pixel),1280x960,1024x768,800x600, 640x480, 352x288, 320x240, 160x120.
Still Image Capture Resolution: Up to 1280 x 960
Frame Rate: Max. 30f/s Under 600 Lux Brightness
Flicker Control: 50Hz / 60Hz Option
Video Format: AVI
Snap Shot Format: JEPG
Light Source: White Light LED x 8 (have ON/OFF function)
Magnification Ratio: 20X ~ 200X (Manual)
Power Supply: USB Port (5V DC)
Software Compatibility: TWAIN / VFW/ Direct Show AP (Driver)
System Requirement: Pentium Computer with 700MHz & Above, 20M HD Space CD ROM Driver,
128MB RAM, Direct X VGA Card
PC  Interface: USB2.0 & USB1.1
Operation System: Windows /XP/Vista
Dimension: 112 mm ( L ) X 33 mm ( R )
Accessories: A1-Alloy Stand, User Guide, CD ROM (Driver), Color Box

 

  Safety Cautions

1.        Avoid touching the lens with finger to dirty it and protect the product from electrostatic damage.

2.        Do not attempt to disassembly any part of this product.

3.        Do not attempt to service this product yourself. Opening the covers may expose you to dangerous voltage points or other risks.

4.        Storing and operating USB digital microscope at Temp: -20 ~ 45°C, Humidity: 45% ~ 85%, as this will extend Product life and prevent damage to the product.

5.        Do not allow this product to have contact with water or other liquids. If water or other liquids enter the product interior, immediately unplug the product from PC. Continued use of the product may result in fire or an electrical shock.

6.        Do not use any detergent or volatile solution, which will damage the camera case, painted surfaces and lens. Only use a soft cleaning cloth to clean it.

7.        Do not place this product near a heat source or expose direct flame, avoid the lens damaged by high temperature or humidity

8.        If the lens is dirty, please use a kens brush on soft cloth to wipe clean. Avoid touching it with your fingers. Exercise care to avoid scratching the lens.

9.        Need to read USB digital microscope User’s Manual before using and storing it.

10.    To avoid electric shock, remove all electricity source before moving PC.

 

  Package Contents
 

    The USB digital microscope package includes the following:

      
 

       1.    USB Microscope

2.    CD ROM (Driver)

3.    Stand (Metal)

 

  System Requirements

    In order to install USB digital microscope, you will need the following minimal systems:

 

     OS: Windows XP or Vista

     CPU: Pentium IV 1.0G, Celeron, AMD Athlon

     CD-ROM

     Available USB port (if it is USB1.1, maybe some software function will be disabled)

     256MB RAM

     100MB available hard disk space

       Graphic card: 16-bit
 

 

Recommended PC specification for optimal performance:
 

 

√    OS: Windows XP SP2 or Vista SP1 or above

√    CPU: Pentium IV 1.6G, Celeron, AMD Athlon or above

√    CD-ROM

√    Available USB 2.0

√    512MB RAM or above

√    10GB available hard disk space or above

      √    Graphic card: 32-bit or above
 

 

 

 

  Payment : PAYPAL ONLY
 

 

  Shipping : Airmail Register Packet