|
|
|
 |
Brand
new!
A diamond Band Saw AND the 8" Flat Lap machine
together as a combo unit!
Lapidary DB-100™ Diamond Band Saw
with Diamond Saw Blade
Improve your faceting results by cutting along the veils for cleaner finished gems.
The coolant system provides a continuous, regulated flow of clean coolant to the diamond blade when wet sawing.
Uses water for coolant to avoid messy oil clean-up.
|
Inland DB-100 Diamond Band Saw
with a diamond saw blade
Brand new in the box!
Note: a diamond blade on skin
is roughly like running your finger down the edge of a file!
It MIGHT cut, but probably won't.
To see other combinations
of machines and conversion kits, please see our Store.
|
 |
The Inland DB-100 Diamond Band Saw is
the perfect saw for intarsia, free form, and
even cabbing preforms. Saws hundreds
of minerals, from Acanthite to Zircon.
Increase your yields on valuable rough with accurate preforms cut right out of the middle
of a piece! Improve your faceting results
by cutting along the veils for cleaner
finished gems.
Weighs less than 10 lbs.
Perfect for RVers who like to travel and rockhound.
It is rigid and extremely quiet; perfect for an RV park
sitting or working in a yard and not bothering neighbors!
* Rocks
sold separately |
Product Uses:
* Saw slabs into more unique freeforms with ease
* Saw slabs more preciously with less waste
* Saw rough gemstone to make faceting easier
* Trims stone away for better cabs
* Saw gemstone rocks for less loss of gemstone
* Saw stone geodes, bottles, sea shells and marbles in half
* Saw all types and textures of stained glass
* Make stone or glass jigsaw puzzles
* Cut multiple pieces simultaneously
* Cut intricate pieces and shapes
* Reduce scrap by getting the piece on the first try
* Cut complex patterns
* Make scale stone or brick walls from the real material
* Saw tile for authentic scale flooring
* Saw ceramic and flooring stone for home installation |
 |
Example of no waste in cutting cabs,etc. | |
 |
Specifications:
Construction: Injection molded, structural grade thermoplastic.
Motor: Permanent magnet, speed controlled, up to 2800 RPM.
Torque: 48 oz.-in. (.13 HP)
Work surface: 9" x 10"
Size: 18" high x 10" deep x 12" wide.
Weight: 9.0 pounds
Throat Depth: 4.75" (12 cm)
Cutting Depth: Maximum material thickness: 3" (7.6cm), up to 1" solid slab glass, up to 3" diameter bottle.
Minimum Radius: 3/16" (.5 cm)
Maximum Radius: 4.75" (12 cm)
Cutting Speed: Dependent on material type and thickness. Up to 12"/minute (30.5 cm/minute)
Voltage: 115V
Two Year Full Confidence Warranty |
Key Features |
1. Comes with a diamond blade for sawing agates, opals, glass, stone, and most other hard materials.
2. The optional WoodCut™ and MetalCut™ blades saw wood, plastics, fiberglass, leather, non-ferrous metals, thin brass and copper, tin, printed circuit boards and more.
3. Replaceable BladeSert™ blade guides make the most intricate cuts simple. The upper blade/drip guide is adjustable for varying material thickness.
4. The coolant system provides a continuous, regulated flow of clean coolant to the diamond blade when wet sawing. Uses water for coolant to avoid messy oil clean-up.
5. The five part spring-loaded tension system, molded into the frame, insures proper wheel alignment, simple blade setup and perfect tracking hour after hour. The spring-loaded tension system acts like a shock absorber to protect and enhance blade life.
6. The work surface is made of machined aluminum 9" x 10". Drain channels funnel coolant into the internal drain system for a clean, clear view while sawing.
7. The frame, cover, and water reservoir are molded entirely from structural grade thermoplastic.
8. All frame and interior support walls are extra thick for maximum strength and durability.
9. The rigid molded housing absorbs and deadens sawing and motor sounds for quiet operation. The plastic construction makes it extremely light weight and easy to handle, so you can take it with you on the road!
10. The motor type is permanent magnet, high torque, with built in speed control. These are powerful DC motors that more consistently maintain torque as speed decreases.
11. Integrated internal drain channels and drain tubes collect and funnel excess, dirty coolant away from the blade and prevent it from re-circulating throughout the saw. |
Available Parts and Accessories
BladeSert Blade Guide
NOTE:
The BladeSert will wear with saw use. The slot
that the blade passes through will widen over time. Using
a worn BladeSert allows for excess play in the
blade and the blade becomes more likely to break. How
fast this happens will depend on use and your sawing
style. You should check the BladeSert for wear
each time you use the saw. Immediately replace the BladeSert when
it begins to show signs of widening and wear. It is also
a good practice to use a new BladeSert whenever
you install a new blade.
37.7" (96cm) Diamond Blade replacement.
96cm WoodCut Blade for Band Saw
The
optional WoodCut Blade
Allows you to cut woods of all types, make scale wood
parts, create wood jigsaw puzzles and much more. We have
found that it is the best blade for cutting antlers and
bone.
96cm MetalCut Blade for Band Saw
The optional MetalCut Blade allows
you to cut metal templates, scale pieces, tubing, and shapes. Cuts non-ferrous
metals like copper, aluminum, silver, etc.
|
| |
But wait! There's more!!
Lapidary SwapTop 8 " Flat Lap Machine
Flat Lap Machine for Cabbing and Polishing
|
 |
The SwapTop 8" Flat Lap is the most affordable 8" cabbing set up available today. With over 75% more diamond surface than our 6" machine, you can work bigger pieces and work faster than ever before. Because of its unique low profile design, the SwapTop can be taken anywhere, but it will still pass muster on the workbench at home.
Water cooled system means no messy oil to clean up. 2800 RPM motor allows you to quickly finish the finest cabs possible. This machine includes (almost*) everything you need to start making cabochons today.
*Rocks sold separately
Additional Information:
Includes: Motor unit, base, grinder work surface, (4) 8" diamond laps, polishing pad, Polishing Powder & Brush, Water Drip System, splashguard, Master Lap & arbor, and instruction guide.
Size: 11" wide
x 10" deep x 7 " high
Motor Type: Permanent Magnet
DC Motor Torque: 48 oz-in (.339 N-m)
Motor RPM: 2,800
HP: .086
Integrated Speed Control for near infinite adjustment
Arbor OD: 1/2"
Fits any 6" or 8" laps with 1/2" arbor holes
Two Year Full Confidence Warranty
|
Key Features
8" Diamond Disks: Includes (4) diamond disks plus a polishing pad.
(1) 170 Grit 8" Flat Lap Disk
(1) 325 Grit 8" Flat Lap Disk
(1) 600 Grit 8" Flat Lap Disk
(1) 1200 Grit 8" Flat Lap Disk
(1) polishing pad
Quiet and Powerful:
Our direct drive Permanent Magnet DC motor is stronger than other machines you will find for two or three times the price. Comes complete with integrated speed controller.
Convenient Size:
Quiet but powerful DC motor allows the 8 " disks to provide a full 1 1/8" depth of cut, more than enough for trimming up pre-slabbed material!
Quick and Easy:
No hassle product assembly, operation is easy and straight forward, and diamond disk changes take less than a minute.
Converts to Trim Saw:
Quickly and easily converts to a SwapTop Trim Saw with the optional
conversion kit.
Converts to Edger/Shaper:
Quickly and easily converts to a SwapTop Edger/Shaper with the optional conversion kit.
Can be used with 6" OR 8" laps. |
| |
| |
Please
note:
We are dealers of Inland
Lapidary products.
All items from Inland are brand new, in the box, and shipped directly from the
manufacturer.
As such, we have access to multiples of any item, and combinations of any items.
If you don't see a combination made for what you need, please contact us and
we can make one.
Due to the fact that they are shipped from the manufacturer, Inland products
may be combined with other Inland products, but they may NOT be combined with
any slabs, cabs, gemstones, decals, or anything else.
|
Payment information:
Payment must be received within 15 days of the end of the auction.
We accept PayPal (immediate shipping)
Ebay no longer allows paper payments.
For this you must order from our website.
|
Shipping information:
All UPS orders can only be delivered to Street Addresses, no PO boxes!
ALL OTHER COUNTRIES
Shipping time will most likely be in excess of 20 days.
Inland no longer drop-ships outside of the US, so we have to have them ship to us, then we have to ship to you.
This is why the shipping time is so high.
Also, any country other than Canada must be custom built.
Shipping will be by UPS or USPS only.
For shipping rates please click on the "calculate" link.
|
Warranty
information
Please allow 7-14 days for delivery after processing.
Shipping
and handling is non-refundable.
If the item is the wrong item, we will exchange it.
Any damage, non-working problems, or breakdowns after use must be handled
through Inland's Customer Service.
If the machine has been used at all, it is not returnable!
Inland's Customer Service is excellent, please trust them! They have ALWAYS made
our customers happy.
If you do not agree with our terms, please do not bid.
|
If you have
questions, we'll be happy to answer them. Please submit your valid user
ID
with your questions. We reserve the right to refuse information to and bids from
users with
nasty negs, private feedback, invalid IDs, or who are otherwise rude or discourteous.
We will file a non-paying bidder claim after 15 days.
|
| Please see our Store for more great lapidary deals! |
| |
|
Nature's Gifts
Nature's Gifts is a
subdivison of Columbine-Rosebud Enterprises and Bullseye Archery
Winter Address: October thru March: Brenda, Arizona 85348 (Salome area)
Summer Address: April through September: Riverton, Wyoming 82501 |
Website designed and marketed by
Columbine-Rosebud Enterprises
to the needs and desires of the customers of Nature's Gifts
Copyright 2004-2009 @ Nature's Gifts
| | |
Powered by eBay Turbo Lister
The free listing tool. List your items fast and easy and manage your active items.
|
Back to eBay Home
) 
Natures Gifts of Arizona
Print
Report item
