Four display modes.
The pitchblack’s LED meter can be switched between four display modes including: Meter, Full Strobe, Half Strobe, and Mirror.
1. Meter mode
Similar
to using a needle meter, tune your instrument so that the green LED in
the center of the LED display lights and both tuning guide LED’s are
lit. The tuning LED’s will be to the right of center if your instrument
is sharp, and to the left of the center if your instrument is flat.
2. Full Strobe mode
Tune
your instrument so that the LED meters stop streaming and both tuning
guide LED’s are lit. The LED meters will stream from left to right if
your instrument is sharp and from right to left if your instrument is
flat.
3. Half Strobe mode
Tune
your instrument so that the LED meters stop streaming and only the
green LED in the center is lit and both tuning guide LED’s are lit. The
LED meters will stream to the right of center if your instrument is
sharp, and to the left of center if your instrument is flat. When the
pitch is correct, only the center LED will be lit.
4. Mirror mode
Tune
your instrument so that the two LEDs on the left and right sides of the
center LED meet in the middle and both tuning guide LED’s are lit. The
pitch lit LEDs will spread farther apart the more your instrument is
out of tune. The left tuning guide will light if your instrument is
flat, and the right tuning guide will light if your instrument is
sharp.
100% True Bypass output keeps your tone intact.
The
pitchblack mutes the input signal for silent tuning, and when you’re
not tuning the input is passed directly to the output jack without
being affected by any circuitry (True Bypass). So even if you connect
the pitchblack between several of your favorite pedals, the signal will
pass without going through the internal buffer amp, ensuring that the
sounds you've created using your effects will not be colored in any
way. The pitchblack is designed to coexist transparently with other
effect pedals.
A perfect fit in your pedal board plus the DC output powers other pedals.
The
pitchblack is designed to fit conveniently into your pedal board
system. It provides a DC OUT jack that can supply power to other effect
pedals when the optional AC adaptor is used. By connecting optional DC
cables, you can supply up to 200 mA of power to multiple effect pedals,
simplifying the power connections in your pedal board.
Service Guarantee
All products sold are BRAND NEW, 100% genuine and come with original factory packaging (unless otherwise stated).
Ebenex Music offers a 1 year limited warranty and a 7 day exchange policy on all electronic products. Feel free to send it back within 7 days if you are not 100% satisfied with your purchase. Please read our terms and conditions for warranty limitations.
Ebenex Music is an established online retailer on eBay with a Platinum Powerseller account on eBay Australia. (eBay ID: ebenex). With over 11,000 successful transactions, be assured of quality service. Feel free to find out more about us.
Email us at sales@ebenex.com for enquiries.
Payment and Postage Information
Payment is to be made via Paypal or by Australian direct bank deposit.
Postage payment will be as listed (see table below). International buyers are responsible for all incoming taxes and duties.
|
Delivery Method |
Approx. Delivery Time |
Cost (Local) |
|
DHL Express / FedEx
|
2 to 5 working days |
$20 |
International Buyers – Please Note:
- Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer’s responsibility.
- Please check with your country’s customs office to determine what these additional costs will be prior to bidding/buying.
By bidding/purchasing the item in this listing, you are agreeing to our Company's terms and conditions.