|

Battery Desulfators Life Span Optimization
Optimize your battery life span for up to 3 times!
Sulfation, or lead acid crystal buildup on your battery plates is by far the most common cause of battery failure, accounting for 84% of batteries according to the Battery Council International. We therefore junk our batteries long before the end of their designed lifespan.
The Infinitum Desulfator Battery Life Optimizer prevents sulfation on your battery and reverses the existing lead sulfate crystals on the plates, ensuring a battery with maximum lifespan and optimum performance. This desulfation process can double or tripple your battery life span.
Testimonials Read more
"One thing I really like about your unit over some of the others which are made here in the USA is the voltage-sensitive shutoff feature you've included in the circuit design."
~ Joel Grant, Auto enthusiast, Carmel, Indiana, USA.
"I am stoked, it has not only saved me A$4500 (USD4405) on a (fork lift) battery pack but it costs much less to recharge as well so I save on my power bill!"
~ Tony Castleman, Qualified mechanic of 25 years, North Shore, Victoria, Australia
"Thanks to your Desulfator, a junked battery I bought had an additional 16 months life span!"
~ Anthony Charles, Director, SQT Technologies (M) Pte Ltd.
“One reason your battery desulfphators appeal to me is the sealed epoxy encapsulation, protecting it from the wet and salty air of the marine environment.”
~ Ken Lessin, Marine electrician, Caribbean.
"These Battery Desulfators have been successful in the revival of the shelf sulfated automotive batteries that resisted normal charging and were destined to be scrapped for recycling"
~ Siew Chee Pong, Director, Makenta Engineering Pte Ltd. |
 |
Why buy from us?
- Most robust desulfator in the market.
- Unique shut-off and polarity protection feature.
- Revives all acid/gel batteries up to 3 times.
- Works regardless of Ah level.
- EMC & safety certified.
- 1-year warranty.
- Better than desulfator additives (EDTA). more
- Reusable, outlasting your batteries.
- Shipped within 1 business day.
|
Why you need desulfators & how you will benefit |
84% batteries fail prematurely
This is due to lead sulfate crystal buildup on the plates. This means that most people throw away batteries before they have to! |
Save your hard earned money
Lower the frequency of battery change. Payback within one battery change. |
Batteries lose life span even before use!
New batteries suffer from lead sulfate crystallization before you even buy them.
|
Save the earth
Reducing the rate of battery disposal means less disposal of hazardous lead and sulfuric acid. |
Double or triple the service life of batteries
Our Desulfators generates an electrical pulse that shatters and removes lead sulfate crystals maximizing its life-span and performance. |
Optimize efficiency & storage capacity
Prevents lead sulfate crystallization in new batteries. Prevents damage to lead plates due to lead sulfate crystal buildup. |
Lowers battery operating temperature
The degree of battery discharge increases with temperature whether in use or storage. With a lower operating temperature, less evaporation occurs.
|
Revives 'dead' or junked batteries
Revives most dead batteries when used in parallel with a charger. |
Why buy from us? |
Infinitum Desulfators are possibly the best in the market today. The chart below shows you a comparison with some of the leading battery desulphator brands.
|
| |
INFINITUM
DESULFATORS |
Brand W
from USA |
Brand A from Australia |
Brand H
from USA |
|
| Polarity protection |
YES
|
Fuse blows |
N/A |
N/A |
|
| Fuse |
Not needed |
Yes |
Yes |
Yes |
|
| Auto Shutoff |
YES |
N/A |
Yes |
N/A |
|
| Water Resistant |
YES |
20-90% Relative humidity |
Nil |
Nil |
|
| Heat resistant |
YES |
Nil |
Nil |
Nil |
|
| Casing |
Aluminum |
Plastic |
Plastic |
Plastic |
|
| Desulfates all batteries |
YES* |
Yes |
N/A |
N/A |
|
| Battery diagnosis |
YES |
None |
None |
None |
|
| Maintenance Free |
YES |
Fuse may blow |
Fuse may blow |
Fuse may blow |
|
| Amp Hour (Ah) |
Unlimited |
Up to 1KAh |
Up to 300Ah |
up to 500Ah |
|
| Voltage |
12V, 24V
or less** |
6V & 12V |
12V |
12V & 24V |
|
| International Safety & Quality certified |
YES |
None |
N/A |
N/A?s |
|
| Electromagnetic Compatibility (EMC) |
YES |
None |
N/A |
N/A |
|
| Lowers internal battery operating temperature |
YES |
N/A |
N/A |
N/A |
|
| Works in sub zero temperatures |
YES |
N/A |
N/A |
N/A |
|
| Lugs |
YES |
None |
Aligator clips |
Yes |
|
| 1 year warranty |
YES
|
None |
None |
None |
|
* Lead acid batteries, SLA batteries, AGM (Absorbed Glass Mat) batteries, gel batteries, deep cycle batteries, maintenance-free batteries (dry batteries), calcium-calcium, calcium-silver, lead-calcium, or lead-antimony batteries.
**6-12V Desulfator models 12V25R and 12V40R without shut off feature. |
Test results in reviving a 'dead' battery

Charging characteristics of a 'dead' 17Ah, 12V Sealed Lead Acid Battery
-
A randomly chosen sealed lead acid battery of 17 Ah, 12V that was abandoned for 6 months was selected for this test.
-
The initial battery voltage measured was 6.0V and attempts to recharge it failed as it will not take charging current. The maximum charging current achieved was 0.2 A – 0.3 A.
-
The same battery was fitted with BatteryTechSolutions's Battery Desulfator and charged for 10 hours and results were recorded as above.
-
The results clearly showed a successful revival of the dead battery.
Many of the features below are unique and unrivaled by other brands |
Ease of mind
We offer a one year warranty against any manufacturing defects. No questions asked. Return it to us and we'll have it replaced in no time. |
Easy installation
The desulfator is very easily installed. The industrial grade double-sided tape is designed to withstand heat generated by the engine. Read more |
Water/fire resistant rock-solid encapsulation
Your desulfator will be encapsulated in a robust epoxy resin-filled aluminum casing, protecting it from the elements of humidity, heat or vibrations in engine chamber.
|
Lowers internal battery operating temperature
The degree of battery discharge increases with temperature whether in use or storage. With a lower operating temperature, less evaporation and discharge will occur. |
Long lasting and maintenance free
We've designed the unit to last as long as your vehicle! It is best that the unit be installed on the battery holder or the chassis of the vehicle. |
Battery diagnosis
The built in LEDs provide you with a basic status of your battery and even your alternator. Read more
|
Versatility
Works on ALL lead acid automative batteries, including 'maintenance-free' batteries or 'dry batteries', regardless of the amperage (Ah). |
No short circuits, no fuse, no fuss
Your desulphator will come with total polarity protection built in. You will have no short circuits in the unlikely event that the cables are incorrectly installed.
|
Better than desulphator additives
Chemical desulfators or battery additives produce temporary results, but the lifespan of the battery cannot maximized. Learn more |
Safety and Quality Certification
Our desulfators have gone through EMC (Electromagnetic Compatibility) inspection as well as stringent tests by SIRIM that conform to national and international standards and guides. Neither vehicle electronics nor the Desulfator unit will experience damage. |
Revives 'dead' or junked batteries
Revives dead batteries when used in parallel with a charger. |
Auto shutoff feature
We designed the desulfator to automatically shutoff when your battery voltage drops below 12V so as not to drain the battery when car is not in use. |
Areas of application

|
• Automotive batteries
• Motorbike batteries
• Marine, jetski batteries
• Truck, RV batteries
• Electric golf carts
• Electric cars and scooters
• Electric bicycles
• Electric wheelchairs
|
• Earthship / off-grid battery banks
• UPS battery banks
• DC systems of electrical substations
• Telecommunication hubs
• Wind farm storage systems
• Solar farm storage systems
• Back-up system battery banks
• DC starting systems of generators |
| |
Installation
The unit can be installed either on the battery itself, the battery holder, or the chassis of the vehicle. It is strongly recommended that the surface area of the installation location is clean.
Choose either one of these methods to install.
|
Basic battery status display
Green LED - Battery voltage is above 12.5V. The Green LED must be on when the engine is running.
Red LED - Battery voltage is below 12V. You should never see this when the engine is running!
If your engine is running and no LEDs are illuminated, either the unit has failed (which is unlikely) or your alternator has failed!
When you crank the car, you may notice the Red LED illuminated for a short while, then the Green LED lights up. This is normal. During cranking, current is drawn out of the battery, causing a drop in voltage. At this moment, the Red LED indicates the voltage drop. After the alternator kicks in, the Green LED will illuminate, confirming that the voltage is above 12.5V.
|
Method 1
 |
Method 2
 |
How does it work?
As automobiles are usually parked longer than they're being driven, the batteries are left discharging for longer periods of time than when they are being charged.
Charging:
2PbSO4 + 2H20 -> Pb + PbO2 + 2H2SO4
Discharging:
Pb + PbO2 + 2H2SO4 -> 2PbSO4 + 2H20
This causes water and lead sulfate (PbSO4) to form at a faster rate than it can be reconverted back to lead, lead dioxide and water. Lead sulfate that's left sitting, originally spongy, will eventually crystallize. Once in crystal form, the lead sulfated cannot be reconverted, even when the battery is being charged. This causes a reduction in active material (the lead and lead dioxide) and surface area where chemical reaction takes place. Eventually, the battery will no longer have the capability to supply enough cranking current to start a car. This process, also known as sulfation, is the main cause why batteries fail prematurely!
The Desulfator generates Amplitude Modulated Pulses (AMP) at the resonance frequency of the crystals to shatter the covalent bonds that hold it together. This allows the lead sulfate to be reconverted once the battery is charged. A battery free from lead sulfate crystals will have its lifespan stretched to its maximum! No more premature failure due to sulfation!
|
Specifications
Input Voltage Range |
11.5 V - 17 V |
Output Current Range |
1.6 A (pk) |
Cut-In Voltage (Vd) |
12.5V |
Operation Indication |
Green LED |
Low Voltage Indication |
Red LED |
PCB Specification |
CEM 1, UL 94V-0 |
Dimensions |
25mm(H) x 78mm(D) x 60mm(W) |
Weight |
180g (6.35 ounces) |
Flame Retardant Encapsulation |
Yes |
Polarity Protection |
Yes |
Short Circuit Protection |
3A, Auto Reset |
Connection Leads |
UL 1015 |
Terminations |
Ring and Fork Lugs |
Safety Standard |
IEC 380 |
EMC Standard |
VDE 0871 |
Alunimium Casing |
6063-T5 (Anodized BS1615) |
|
Payment
PayPal Verified
We understand our customers want their online transactions to be simple and secure. To increase security, we have a verified PayPal account, so you can feel secure when using their system to make payments to BatteryTechSolutions.com.
PayPal Accepted Currencies
If you wish to pay in your local funds or major currencies, write to us after you win this bid or have made a purchase with us. We will then invoice you according to your preferred currency.
Telegraphic Transfers
We receive payments via Telegraphic Transfer (TT) in major currencies. Write to us at info@batterytechsolutions.com.
Find our more
Visit our website for more information about our product and articles on how you can optimize the life span of your battery.
Free articles
Battery maintenance & care
How batteries sulfate
Reviving dead batteries
Why not desulphator additives
|
Worldwide shipping
We've have hundreds of satisfied customers worldwide. United States, Canada, Virgin Islands, Brazil, Chile, The Netherlands Antilles, United Kingdom, Belgium, Czech Republic, France, Germany, Greece, Ireland, Italy, Portugal, Spain, Sweden, Switzerland, Turkey, Bahrain, United Arab Emirates, South Africa, Zimbabwe, Australia, New Zealand, Hong Kong, India, Indonesia, Japan, Philippines, Singapore, Sri Lanka, Vietnam and Malaysia. There's virtually nowhere we will not ship.
Delivery: We ship within 1 business day from your payment. Most times, within the same day.
| Destination |
Cost per unit |
|
| Malaysia |
FREE*
|
| Singapore & ASEAN |
USD 3.00 |
FREE* |
| Asia Pacific & Australasia |
USD 5.00 |
USD 2.00 |
| Europe/Russia |
USD 5.50 |
USD 3.00 |
| USA / Americas |
USD 6.00 |
USD 4.00 |
*Offer only valid for Buy It Now items for up to 8 units. Write to us if you wish to purchase more at info@batterytechsolutions.com.
Registered Mail: An additional USD2.50 (AS$2.90 or SGD 3.60) will apply. Includes tracking information and insurance. Items are not insured if buyers do not use this service. View examples of how your item can be tracked.
|
Premier Courier services with DHL available at discounted prices:
Delivery in 2 - 4 days.
| Destination (non-remote areas) / Number of units |
1 - 2 |
|
|
|
|
| Singapore |
USD 8.50 |
USD 10.50 |
USD 12.50 |
USD 15.00 |
USD 17.00 |
| Australia, New Zealand, Asia Pacific. |
USD 12.50 |
USD 17.00 |
USD 21.50 |
USD 27.00 |
USD 31.00 |
| USA, Canada. |
USD 14.00 |
USD 19.00 |
USD 24.50 |
USD 30.00 |
USD 35.00 |
| Belgium, France, Germany, India, Italy, Luxembourg, United Kingdom. |
USD 17.00 |
USD 25.00 |
USD 32.00 |
USD 40.00 |
USD 48.00 |
| Czech Republic, Finland, Greece, Portugal, Spain, Sweden, Switzerland, Turkey. |
USD 21.00 |
USD 27.50 |
USD 34.00 |
USD 42.00 |
USD 50.00 |
Prices are for reference only and are subject to change, write to us at info@batterytechsolutions.com for the current shipping costs to your country. Please include your full shipping address, inclusive of postal code.
|
© 2006-2009 BatteryTechSolutions.com |
|
|