2009 UPDATED HIGH PRECISE 3 axis Milling / Lathe Readout and scales

Updated modal, Lastest modal (I will show you the old modal picture in the following description)

High PRECISE Glass scale THAT HAVE BEEN CHECKED BY LASER

79 pages of photos guide you how to use step-by-step

Installation manual for both MILLING machine and LATHE machine

You can choose the LENGHT OF GLASS SCALE

You can choose the Milling modal or Lathe modal

2 years free warranty and life time free maintenance service

EXPRESS MAIL SERVICE with TRACKING NUMBER

Manufacturer Suggested Retail Price:1899USD

I will show you the Readout, glass scale in order

Firstly, please see the digital readout

THE PHYSICAL FEATURES OF THE DIGITAL READOUT

• Membrane Seal diaphragm touch keys (Water/Coolant/Dust Proof)

THE ELECTRICAL FEATURES OF THE DIGITAL READOUT

• Power Supply Voltage: AC 100V ~ 230 V, 50 Hz ~ 60 Hz (Automatic Detection)

 

OPERATION FEATURES OF THE DIGITAL READOUT

DRO-3M (MILL DRO)

You can choose the MILL DRO or LATHE DRO when you buy this item

In the following, I show you the high precise glass scale

LENGHT OF GLASS SCALE ARE AVAILABLE

Glass Scales are available in these travel/measuring length:
Metric: 50, 120, 170, 220, 270, 320, 370, 420, 470, 520, 620, 750, 820, 920mm.
Inches: 2, 4.7, 6.7, 8.7, 10.6, 12.6, 14.6, 16.5, 18.5, 20.5, 24.5, 29.5, 32.3, 36.2inches.

(Physical Length/Overall Length is 142 mm (5.6") longer)

You can CHOOSE ANY 3 PIECE OF GLASS SCALE FROM THE ABOVE.
Unlike other Auction, which give you Standard Length.

Our Factory also make scales up to 3000mm, 120".

Here are some common scales for these standard machine:

FEATURES OF THE HIGH PRECISION GLASS SCALE

1. High Precision Etched glass
   

2. Resolution : 5um (0.005mm).0002 inch
   

3. Signal : TTL SQUARE WAVE
   

4. Grating pitch: 0.02mm (50LP/min)
   

5. Accuracy: ±0.005 mm or 0.0002" (at 20 deg C)
   

6. Reference marks at interval of 50mm
   

7. Response Speed: 60m/min or 40ins/sec
   

8. Cable length: Armoured 3 Meter (about 9 feet)

THESE ARE HIGH QUALITY SCALES THAT HAVE BEEN CHECKED BY LASER!
 

Drawing of the Scales

Slim Scales (Model JCXF ) - Normally used for Lathe Cross-slide ( measure up to 370mm, 14.5")

Standard Scales (Model JCXE) - Used for Z-axis on Lathe and Milling machine ( measure up to 1020mm, 40.1")

Long Scales (Model JCXG) - Used for Big machine with extended length ( measure up to 6000mm, 236")

Item Units and Pictures

FOR ALL OF OUR CLIENTS

NOTICE: There are many new brand name of similar item in the market recently, although their price are really cheap, but the quality of their products are also terrible:

1. That factory only produce as a lower price as they can, they won't care about the quality.All our item is pass the ISO9001 quality certification

2. Have visit and purchase the item samples from some other supplier, many samples are in bad quality. After compare samples again and again from different supplier, finally we provide this top-quality item for you at lowest price.

3. You can purchase a high quality and safety machine, but please don't waste the money for a cheaper but a low quality machines. We only sell top-quality item. Base on the top-quality, then we will beat our price as lowest on eBay.

4. We keep a good relationship with the supplier, so that we can get the stable and reliable stock for our client.

5. We only sale the top-quality machine, we can provide the reasonable price since we have fight with the supplier as a lowest cost as we can.

Retail price for this item is 1899USD. Now you only need to pay less than half of retail price and you will also have the fully guarantee for 48 months.